Wisconsin Administrative Code
Department of Natural Resources
NR 400-499 - Environmental Protection - Air Pollution Control
Chapter NR 422 - Control Of Organic Compound EmissionsFrom Surface Coating, Printing And Asphalt Surfacing Operations
Section NR 422.083 - Plastic parts coating - part 1
Current through August 26, 2024
(1) APPLICABILITY.
(2) EXEMPTIONS. The application of touch-up coatings is exempt from the requirements of this section.
(3) EMISSION LIMITATIONS. After December 31, 2002, no owner or operator of a plastic parts coating operation may cause, allow or permit the emission of any VOCs in excess of the limitations specified in Table 1B. If more than one VOC content limitation in Table 1B applies to a coating, the lowest VOC content limitation shall be satisfied.
Table 1B
VOC Content Limitations for Coatings Used in Plastic Parts Coating
[kilogram/liter (pounds/gallons) of coating, excluding water, as applied]
Coating Application and Type |
Maximum VOC Content |
(a) Automotive/transportation |
|
1. Interiors |
|
a. Baked |
|
Prime coats |
0.46 (3.8) |
Other nonclear coatings |
0.49 (4.1) |
b. Air dried |
|
Prime coats |
0.42 (3.5) |
Other nonclear coatings |
0.59 (4.9) |
2. Exteriors |
|
a. Baked |
|
Nonelastomeric prime coats |
0.54 (4.5) |
Elastomeric prime coats |
0.60 (5.0) |
Clear coats |
0.52 (4.3) |
Other coatings |
0.55 (4.6) |
b. Air dried |
|
Prime coats |
0.66 (5.5) |
Clear coats |
0.54 (4.5) |
Other coatings, red and black |
0.67 (5.6) |
Other coatings |
0.61 (5.1) |
3. Specialty |
|
a. Adhesive primers |
0.82 (6.8) |
b. Air bag cover coatings |
0.71 (5.9) |
c. Anti-glare safety coatings |
0.77 (6.4) |
d. Electrostatic prep coatings |
0.82 (6.8) |
e. Head lamp lens coatings |
0.89 (7.4) |
f. Pad printing coatings |
0.82 (6.8) |
g. Reflective argent coatings |
0.71 (5.9) |
h. Resist coatings |
0.82 (6.8) |
i. Soft coatings |
0.71 (5.9) |
j. Stencil coatings |
0.82 (6.8) |
k. Texture basecoats |
0.66 (5.5) |
l. Texture topcoats |
0.77 (6.4) |
m. Vacuum metallizing basecoats |
0.66 (5.5) |
n. Vacuum metallizing topcoats |
0.77 (6.4) |
(b) Business machine |
|
1. Prime coats |
0.35 (2.9) |
2. Other nonclear coatings |
0.35 (2.9) |
3. Specialty |
|
a. Electromagnetic interference/radio frequency interference (EMI/RFI) shielding coatings |
0.48 (4.0) |
b. Resist coatings |
0.71 (5.9) |
c. Sensitizer coatings |
0.85 (7.1) |
d. Soft coatings |
0.52 (4.3) |
(c) Miscellaneous categories |
|
1. Air cleaner covers |
0.72 (6.0) |
2. Building exterior molding, trim, shutters and weather stripping |
0.75 (6.2) |
3. Building interior molding and trim |
0.30 (2.5) |
4. Cosmetic cases |
|
a. Opaque coatings |
0.58 (4.8) |
b. Other coatings |
0.71 (5.9) |
5. Personal hygiene razors |
|
a. Soft coatings |
0.66 (5.5) |
b. Other coatings |
0.75 (6.2) |
6. Signs |
|
a. Mask coatings |
0.10 (0.8) |
b. Opaque coatings |
0.71 (5.9) |
c. Other coatings |
0.78 (6.5) |
7. Smoke detector covers |
0.75 (6.2) |
(3m) CLEANING MATERIAL WORK PRACTICES. Beginning on March 1, 2013, the owner or operator of a facility subject to this section shall do all of the following:
(4) RECORDKEEPING REQUIREMENTS.