Wisconsin Administrative Code
Department of Natural Resources
NR 200-299 - Environmental Protection - Wisconsin Pollutant Discharge Elimination System
Chapter NR 279 - Petroleum refining
Section NR 279.56 - Standards of performance for new sources (NSPS)

Universal Citation: WI Admin Code ยง NR 279.56

Current through August 26, 2024

(1) Any new source subject to this subcategory shall achieve the following new source performance standards (NSPS):

NSPS effluent limitations

Pollutant or pollutant property

Maximum for any 1 day

Average of daily values for 30 consecutive days

Metric units (kilograms per 1,000 m3 of feedstock)

BOD5

41.6

22.1

TSS

28.1

17.9

COD1

295.0

152.0

Oil and grease

12.6

6.7

Phenolic compounds

0.3

0.14

Ammonia as N

23.4

10.7

Sulfide

0.26

0.12

Total chromium

0.64

0.37

Hexavalent chromium

0.052

0.024

pH

(2)

(2)

English units (pounds per 1,000 bbl of feedstock)

BOD5

14.7

7.8

TSS

9.9

6.3

COD1

104.0

54.0

Oil and grease

4.5

2.4

Phenolic compounds

0.105

0.051

Ammonia as N

8.3

3.8

Sulfide

0.093

0.042

Total chromium

0.22

0.13

Hexavalent chromium

0.019

0.0084

pH

(2)

(2)

1See footnote following table in s. NR 279.13(4).

2Within the range of 6.0 to 9.0.

(2) The limits set forth in sub. (1) shall be multiplied by the following factors to calculate the maximum for any one day and maximum average of daily values for 30 consecutive days.

(a) Size factor.

1000 bbl. of feedstock per stream day

Size factor

Less than 124.9

0.73

125.0 to 149.9

0.76

150.0 to 174.9

0.83

175.0 to 199.9

0.91

200.0 to 224.9

0.99

225.0 or greater

1.04

(b) Process factor.

Process configuration

Process factor

Less than 6.49

0.75

6.5 to 7.49

0.82

7.5 to 7.99

0.92

8.0 to 8.49

1.0

8.5 to 8.99

1.1

9.0 to 9.49

1.2

9.5 to 9.99

1.3

10.0 to 10.49

1.42

10.5 to 10.99

1.54

11.0 to 11.49

1.68

11.5 to 11.99

1.83

12.0 to 12.49

1.99

12.5 to 12.99

2.17

13.0 or greater

2.26

Note: See the comprehensive example in s. NR 279.42(2) (c).

(3) The provisions of s. NR 279.16(3) apply to discharges of process wastewater pollutants attributable to ballast water by a point source subject to the provisions of this subcategory.

(4) The quantity and quality of pollutants or pollutant properties controlled by this subsection, attributable to once-through cooling water, are excluded from the discharge allowed by sub. (2). Once-through cooling water may be discharged with a total organic carbon concentration not to exceed 5 mg/l.

Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.