Wisconsin Administrative Code
Department of Natural Resources
NR 200-299 - Environmental Protection - Wisconsin Pollutant Discharge Elimination System
Chapter NR 230 - Inorganic chemicals manufacturing
Subchapter XXXVI - Copper salts
Section NR 230.365 - Pretreatment standards for existing sources
Universal Citation: WI Admin Code ยง NR 230.365
Current through August 26, 2024
Except as provided in ss. NR 211.13 and 211.14, any new [existing] source subject to the copper salts subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSES:
Table 47
Copper Sulfate, Copper Chloride, Copper Iodide, Copper Nitrate, and Copper Carbonate(1)
|
PSES |
||
|
milligrams per liter |
||
|
Pollutant or pollutant property |
Maximum for any 1 day |
Average of daily values for 30 consecutive days |
|
Copper |
3.2 |
1.1 |
|
Nickel |
6.4 |
2.1 |
|
Selenium |
1.6 |
0.53 |
(1) When a POTW finds that mass limitations are necessary, the PSES shall be the limitations set forth in s. NR 230.362 for copper, nickel, and selenium.
Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
