Wisconsin Administrative Code
Department of Natural Resources
NR 200-299 - Environmental Protection - Wisconsin Pollutant Discharge Elimination System
Chapter NR 228 - Cement Manufacturing
Section NR 228.12 - Standards of performance

Universal Citation: WI Admin Code ยง NR 228.12

Current through August 26, 2024

The following effluent limitations for all or specific subcategories when applied in accordance with s. NR 228.06 establish the quantity or quality of pollutants or pollutant properties which may be discharged by a facility which is a new source subject to the provisions of this chapter:

(1) The pH of all discharges shall be within the range of 6.0 to 9.0.

(2) The temperature of all discharges shall not exceed inlet temperatures by more than 3°C (5.4°F).

(3) The daily maximum limitation for suspended solids is set forth in table 1.

TABLE 1

Effluent Limitations for Suspended Solids (1)

Subcategory

BPT

BAT

Standard of Performance

(1) Nonleaching

.005

.005

.005

(2) Leaching

.4

.005

.4

(3) Material Storage

50 mg/l

50 mg/l

No Discharge

(1) Limitations are for suspended solids in lbs/1000 lbs or kg/1000 kg of product except for subcategory (3) for which limitations apply to concentrations in the runoff discharge.

Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.