Wisconsin Administrative Code
Department of Natural Resources
NR 200-299 - Environmental Protection - Wisconsin Pollutant Discharge Elimination System
Chapter NR 228 - Cement Manufacturing
Section NR 228.11 - Effluent limitations, best available treatment
Universal Citation: WI Admin Code ยง NR 228.11
Current through August 26, 2024
The following effluent limitations for all or specific subcategories when applied in accordance with s. NR 228.06 establish the quantity or quality of pollutants or pollutant properties which may be discharged by a facility subject to the provisions of this chapter after application to process wastes of the best available technology economically achievable:
(1) The pH of all discharges shall be within the range of 6.0 to 9.0.
(2) The temperature of all discharges shall not exceed inlet temperatures by more than 3°C (5.4°F).
(3) The daily maximum limitation for suspended solids is set forth in table 1.
Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
