Wisconsin Administrative Code
Department of Natural Resources
NR 200-299 - Environmental Protection Wisconsin Pollutant Discharge Elimination System
Chapter NR 274 - Nonferrous metals manufacturing
Subchapter XXIV - Secondary Nickel
Section NR 274.244 - New source performance standards

Current through August 26, 2024

Any new source subject to this subchapter shall achieve the following standards:

Table 24-1

Secondary Nickel Slag Reclaim Tailings

NSPS

Maximum for any 1 day

Maximum for monthly average

Pollutant or pollutant property

mg/kg (pounds per million pounds) of slag input into the reclaim process

Chromium

5.653

2.313

Copper

24.410

12.850

Nickel

24.670

16.320

Total suspended solids

526.800

250.500

pH

(1)

(1)

(1) Within the range of 7.5 to 10.0 at all times.

Table 24-2

Secondary Nickel Acid Reclaim Leaching Filtrate

NSPS

Maximum for any 1 day

Maximum for monthly average

Pollutant or pollutant property

mg/kg (pounds per million pounds) of acid reclaim nickel produced

Chromium

2.198

0.899

Copper

9.491

4.995

Nickel

9.590

6.344

Total suspended solids

204.800

97.400

pH

(1)

(1)

(1) Within the range of 7.5 to 10.0 at all times.

Table 24-3

Secondary Nickel Acid Reclaim Leaching Belt Filter Backwash

NSPS

Maximum for any 1 day

Maximum for monthly average

Pollutant or pollutant property

mg/kg (pounds per million pounds) of nickel produced

Chromium

0.528

0.216

Copper

2.278

1.199

Nickel

2.302

1.523

Total suspended solids

49.160

23.380

pH

(1)

(1)

(1) Within the range of 7.5 to 10.0 at all times.

Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.