Wisconsin Administrative Code
Department of Natural Resources
NR 200-299 - Environmental Protection Wisconsin Pollutant Discharge Elimination System
Chapter NR 274 - Nonferrous metals manufacturing
Subchapter V - Primary Electrolytic Copper Refining
Section NR 274.054 - New source performance standards

Current through August 26, 2024

Any new source subject to this subchapter shall achieve the following standards:

Table 5-7

Primary Electrolytic Copper Refining Casting Contact Cooling

NSPS

Maximum for any 1 day

Maximum for monthly average

Pollutant or pollutant property

mg/kg (pounds per 1,000,000 pounds) of copper cast

Arsenic

0.692

0.309

Copper

0.638

0.304

Nickel

0.274

0.184

Total suspended solids

7.470

5.976

pH

(1)

(1)

(1) Within the range of 7.5 to 10.0 at all times

Table 5-8

Primary Electrolytic Copper Refining Anode and Cathode Rinse

NSPS

Maximum for any 1 day

Maximum for monthly average

Pollutant or pollutant property

mg/kg (pounds per 1,000,000 pounds) of cathode copper production

Arsenic

0.000

0.000

Copper

0.000

0.000

Nickel

0.000

0.000

Total suspended solids

0.000

0.000

pH

(1)

(1)

(1) Within the range of 7.5 to 10.0 at all times.

Table 5-9

Primary Electrolytic Copper Refining Spent Electrolyte

NSPS

Maximum for any 1 day

Maximum for monthly average

Pollutant or pollutant property

mg/kg (pounds per 1,000,000 pounds) of copper cathode production

Arsenic

0.068

0.031

Copper

0.063

0.030

Nickel

0.027

0.018

Total suspended solids

0.735

0.588

pH

(1)

(1)

(1) Within the range of 7.5 to 10.0 at all times.

Table 5-10

Primary Electrolytic Copper Refining Casting Wet Air Pollution Control

NSPS

Maximum for any 1 day

Maximum for monthly average

Pollutant or pollutant property

mg/kg (pounds per 1,000,000 pounds) of casting production

Arsenic

0.000

0.000

Copper

0.000

0.000

Nickel

0.000

0.000

Total suspended solids

0.000

0.000

pH

(1)

(1)

(1) Within the range of 7.5 to 10.0 at all times.

Table 5-11

Primary Electrolytic Copper Refining Byproduct Recovery

NSPS

Maximum for any 1 day

Maximum for monthly average

Pollutant or pollutant property

mg/kg (pounds per 1,000,000 pounds) of product recovered from electrolytic slimes processing

Arsenic

0.000

0.000

Copper

0.000

0.000

Nickel

0.000

0.000

Total suspended solids

0.000

0.000

pH

(1)

(1)

(1) Within the range of 7.5 to 10.0 at all times.

Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.