Wisconsin Administrative Code
Department of Natural Resources
NR 200-299 - Environmental Protection Wisconsin Pollutant Discharge Elimination System
Chapter NR 274 - Nonferrous metals manufacturing
Subchapter IX - Metallurgical Acid Plants
Section NR 274.092 - Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available

Current through August 26, 2024

Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT:

Table 9-1

Metallurgical Acid Plants

BPT Effluent Limitations

Maximum for any 1 day

Maximum for monthly average

Pollutant or pollutant property

mg/kg (pounds per million pounds) of 100% sulfuric acid capacity

Cadmium

0.180

0.090

Copper

5.000

2.000

Lead

1.800

0.790

Zinc

3.600

0.900

Fluoride (1)

212.800

121.000

Molybdenum (1)

40.180

20.790

Total suspended solids

304.000

152.000

pH

(2)

(2)

(1) For molybdenum acid plants only

(2) Within the range of 6.0 to 9.0 at all times.

Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.