Wisconsin Administrative Code
Department of Agriculture, Trade and Consumer Protection
ATCP 90-139 - Trade and Consumer Protection
Chapter ATCP 93 - Flammable, Combustible, And Hazardous Liquids
Subchapter II - Adopted Standards and General Requirements
Section ATCP 93.200 - Adoption of standards
The standards listed in Tables 93.200-1 to 93.200-11 are incorporated by reference into this chapter.
Copies of the adopted standards are on file in the offices of the department and the legislative reference bureau. Copies of the standards may be purchased through the respective organizations listed in Tables 93.200-1 to 93.200-11.
Table 93.200-1
|
ACI American Concrete Institute PO Box 9094 Farmington Hills, MI 48333 |
|
|
Standard Reference Number |
Title |
|
350.2R-04, except for section 6.3 |
Concrete Structures for Containment of Hazardous Materials |
Table 93.200-2
|
API American Petroleum Institute 1220 L Street, NW Washington, DC 20005 |
|
|
Standard Reference Number |
Title |
|
1. 570 (4th edition, 2016) |
Piping Inspection Code: In-service Inspection, Rating, Repair, Alteration, and Rerating of In-service Piping Systems |
|
2. RP 575-14 (3rd edition, 2014) |
Guidelines and Methods for Inspection of Existing Atmospheric and Low-pressure Storage Tanks |
|
3. Std 650-With addenda 1 and 2 |
Welded Steel Tanks for Oil Storage |
|
4. RP 651 (4th edition, 2014) |
Cathodic Protection of Aboveground Petroleum Storage Tanks |
|
5. RP 652 (4th edition, 2014) |
Lining of Aboveground Petroleum Storage Tank Bottoms |
|
6. Std 653 (5th edition, 2014) |
Tank Inspection, Repair, Alteration, and Reconstruction |
|
9. RP 1604 (3rd edition, 1996) |
Closure of Underground Petroleum Storage Tanks |
|
10. RP 1615 (6th edition, 2011) |
Installation of Underground Petroleum Storage Systems, Sixth Edition |
|
11. RP 1621 (5th edition, 1993) |
Bulk Liquid Stock Control at Retail Outlets |
|
12. RP 1626 [2nd edition, 2010 (with errata and addendum)] |
Storing and Handling Ethanol and Gasoline-Ethanol Blends at Distribution Terminals and Filling Stations |
|
13. RP 1631 (Fifth edition, 2001) |
Interior Lining and Periodic Inspection of Underground Storage Tanks |
|
14. RP 1632 (3rd edition, 1996, R 2010) |
Cathodic Protection of Underground Petroleum Storage Tanks and Piping Systems |
|
15. RP 1637 (3rd edition, 2006 |
Using the API Color-Symbol System to Mark Equipment and Vehicles for Product Identification at Gasoline Dispensing Facilities and Distribution Terminals |
|
16. Std 2000 (7th edition, 2014) |
Venting Atmospheric and Low-Pressure Storage Tanks |
|
17. Std 2015 (8th edition, 2018) |
Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks |
|
18. RP 2200 (5th edition, 2015) |
Repairing Hazardous Liquid Pipelines |
|
19. Std 2350 (4th edition, 2012) |
Overfill Protection for Storage Tanks in Petroleum Facilities |
|
20. Std 2610 (2nd edition, 2005) |
Design, Construction, Operation, Maintenance, and Inspection of Terminal and Tank Facilities |
Table 93.200-3
|
ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA 19428 |
|
|
Standard Reference Number |
Title |
|
G158-98 (2016) |
Standard Guide for Three Methods of Assessing Buried Steel Tanks |
Table 93.200-3j
|
EI Energy Institute 61 New Cavendish Street London W1G 7AR, UK |
|
|
Standard Reference Number |
Title |
|
1. EI 1529 (7th edition, 2014) |
Aviation fuelling hose and hose assemblies |
|
2. EI 1542 (9th edition, 2012) |
Identification markings for dedicated aviation fuel manufacturing and distribution facilities, airport storage and mobile fuelling equipment |
Table 93.200-3r
|
HIR Technical Services H.I.R. Technical Services P.O. Box 611 Titusville, PA 16354 |
|
|
Standard Reference Number |
Title |
|
HIR FTV RP 2007 |
In-service Inspection of Aboveground Atmospheric Fiberglass Reinforced Plastic Tanks and Vessels |
Table 93.200-4
|
KWA Ken Wilcox Associates 1125 Valley Ridge Drive Grain Valley, MO 64029 |
|
|
Standard Reference Number |
Title |
|
1999 Version |
Recommended Practice for Inspecting Buried Lined Steel Tanks Using a Video Camera |
Table 93.200-5
|
NACE NACE International 1440 South Creek Drive Houston, TX 77084-4906 |
|
|
Standard Reference Number |
Title |
|
1. SP0169-2013 |
Control of External Corrosion on Underground or Submerged Metallic Piping Systems |
|
2. SP0178-2007 |
Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to Be Lined for Immersion Service |
|
3. SP0188-2006 |
Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates |
|
4. SP0193-2016 |
Application of Cathodic Protection to Control External Cathodic Protection of Carbon Steel On-Grade Storage Tank Bottoms |
|
5. SP0285-2011 |
External Corrosion Control of Underground Storage Tank Systems by Cathodic Protection |
|
6. SP0286-2007 |
Electrical Isolation of Cathodically Protected Pipelines |
|
6m. TM0101-2012 |
Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Tank Systems |
|
7. TM0497-2012 |
Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems |
Table 93.200-6
|
NFPA® National Fire Protection Association® One Batterymarch Park Quincy, MA 02269 |
|
|
Standard Reference Number |
Title |
|
1. 10 (2018) |
Standard for Portable Fire Extinguishers |
|
1m. 20 (2016) |
Standard for the Installation of Stationary Pumps for Fire Protection |
|
2. 30 (2018) |
Flammable and Combustible Liquids Code |
|
3. 30A (2018) |
Code for Motor Fuel Dispensing Facilities and Repair Garages |
|
4. 30B (2015) |
Code for the Manufacture and Storage of Aerosol Products |
|
5. 31 (2016) |
Standard for the Installation of Oil-Burning Equipment |
|
5m. 35 (2016) |
Standard for the Manufacture of Organic Coatings |
|
6. 37 (2018) |
Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines |
|
7. 68 (2018) |
Standard on Explosion Protection by Deflagration Venting |
|
8. 110 (2016) |
Standard for Emergency and Standby Power Systems |
|
9. 326 (2015) |
Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair |
|
10. 385 (2017) |
Standard for Tank Vehicles for Flammable and Combustible Liquids |
|
11. 407 (2017) |
Standard for Aircraft Fuel Servicing |
|
12. 410 (2015) - Chapter 6 only |
Standard on Aircraft Maintenance |
|
13. 418 (2016) |
Standard for Heliports |
|
14. 704 (2017) |
Standard System for the Identification of the Hazards of Materials for Emergency Response |
Table 93.200-7
|
PEI Petroleum Equipment Institute PO Box 2380 Tulsa, OK 74101 |
|
|
Standard Reference Number |
Title |
|
1. RP100-17 |
Recommended Practices for Installation of Underground Liquid Storage Systems |
|
2. RP200-13 |
Recommended Practices for Installation of Aboveground Storage Systems for Motor-Vehicle Fueling |
|
3. RP300-09 |
Recommended Practices for Installation and Testing of Vapor- Recovery Systems at Vehicle-Fueling Sites |
|
4. RP400-18 |
Recommended Procedure for Testing Electrical Continuity of Fuel-Dispensing Hanging Hardware |
|
5. RP500-11 |
Recommended Practices for Inspection and Maintenance of Motor Fuel Dispensing Equipment |
|
6. RP600-12 |
Recommended Practices for Overfill Prevention for Shop-Fabricated Aboveground Tanks |
|
7. RP800-13 |
Recommended Practices for Installation of Bulk Storage Plants |
|
8. RP900-17 |
Recommended Practices for the Inspection and Maintenance of UST Systems |
|
9. RP1000-14 |
Recommended Practices for the Installation of Marina Fueling Systems |
|
10. RP1200-17 |
Recommended Practices for the Testing and Verification of Spill, Overfill, Leak Detection and Secondary Containment Equipment at UST Facilities |
|
11. RP1300-13 |
Recommended Practices for the Design, Installation, Service, Repair and Maintenance of Aviation Fueling Systems |
|
12. RP1400-14 |
Recommended Practices for the Design and Installation of Fueling Systems for Emergency Generators, Stationary Diesel Engines and Oil Burner Systems |
Table 93.200-8
|
SSPC The Society for Protective Coatings 40 24th Street Pittsburgh, PA 15222 |
|
|
Standard Reference Number |
Title |
|
VIS 2 (2001) |
Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces |
Table 93.200-9
|
STI Steel Tank Institute 944 Donata Court Lake Zurich, IL 60047 |
|
|
Standard Reference Number |
Title |
|
1m. R012 (2007) |
Recommended Practice for Interstitial Tightness Testing of Existing Underground Double Wall Steel Tanks |
|
2. R051 (2017) |
Cathodic Protection Testing Procedures for sti-P3(D USTs |
|
4e. R111 (2016) |
Storage Tank Maintenance |
|
4m. R892 (2006) |
Recommended Practices for Corrosion Protection of Underground Piping Networks Associated with Liquid Storage and Dispensing Systems |
|
4s. R972 (2010) |
Recommended Practice for the Addition of Supplemental Anodes to sti- P3(DUSTs |
|
5. SP001 (6th Edition, 2018) |
Standard for the Inspection of Aboveground Storage Tanks |
|
6. SP031 (2018) |
Standard for Repair of Shop-Fabricated Aboveground Tanks for Storage of Flammable and Combustible Liquids |
|
7. SP131 (2014) |
Standard for Inspection, Repair and Modification of Shop- Fabricated Underground Tanks for Storage of Flammable and Combustible Liquids |
Table 93.200-10
|
UL Underwriters Laboratories Inc. 333 Pfingsten Road Northbrook, IL 60062-2096 |
|
|
Standard Reference Number |
Title |
|
1. UL 142 (2006) |
Standard for Steel Aboveground Tanks for Flammable and Combustible Liquids |
|
2. UL 971 (1995) |
Nonmetallic Underground Piping for Flammable Liquids |
|
3. UL 1746 (2007) |
Standard for External Corrosion Protection Systems For Steel Underground Storage Tanks |
|
4.UL 1856 (2013) |
Outline of Investigation for Underground Fuel Tank Internal Retrofit Systems |
|
5. UL 2080 (2000) |
Standard for Fire Resistant Tanks for Flammable and Combustible Liquids |
|
6. UL 2085 (1997) |
Standard for Protected Aboveground Tanks for Flammable and Combustible Liquids |
|
7. UL 2258 (2010) |
Nonmetallic Tanks for Oil-Burner Fuels and Other Combustible Liquids |
Table 93.200-11
|
U.S. Department of Energy 1000 Independence Ave. SW Washington DC 20585 |
|
|
Standard Reference Number |
Title |
|
1. DOE/GO 102016-4854 (February 2016) |
Handbook for Handling, Storing, and Dispensing E85 and Other Ethanol-Gasoline Blends |
|
2. DOE/GO 102016-4875 (Fifth Edition, Revised, November 2016) |
Biodiesel Handling and Use Guide |
