Wisconsin Administrative Code
Department of Agriculture, Trade and Consumer Protection
ATCP 90-139 - Trade and Consumer Protection
Chapter ATCP 92 - Weights And Measures
Subchapter I - General Provisions
Section ATCP 92.02 - Weighing and measuring devices; general requirements
Current through August 26, 2024
(1) Except as provided in this chapter, weighing and measuring devices shall comply with applicable specifications, tolerances, and other technical requirements set forth in NIST Handbook 44.
Note: See s. 98.03(2), Stats. The 2014 edition of the NIST Handbook 44 (Specifications, Tolerances and Other Technical Requirements for Weighing and Measuring Devices) is on file with the department and the legislative reference bureau. Copies may be purchased from the U.S. Government Printing Office, Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954. Excerpts can be viewed at http://www.nist.gov/index.html.
(2) Except as provided in sub. (3), no person may sell, offer for sale, use, or distribute for use in this state a weighing or measuring device unless the device is a type or model certified by one of the following:
Note: Devices certified under par. (b) are commonly known as "NTEP-approved" devices.
(3) Subsection (2) does not apply to any of the following:
(4) A commercial weighing or measuring device is no longer considered a type or model certified under sub. (2) if any of the following applies:
(5) No person may misrepresent that a weighing or measuring device is a type or model certified under sub. (2).
(6) No person may cause a weight or measure to be incorrect.
(7) A person who manufactures or distributes a commercial weighing or measuring device violates sub. (6) if all of the following apply: