Wisconsin Administrative Code
Department of Agriculture, Trade and Consumer Protection
ATCP 55-89 - Food, Lodging, and Recreation Safety
Chapter ATCP 75 - Retail Food Establishments
Subchapter V - Vending Machines
Section ATCP 75.36 - Maintenance and service connections
Universal Citation: WI Admin Code ยง ATCP 75.36
Current through August 26, 2024
(1) REPLACEMENT PARTS. All replacement parts and tubing shall be equal to or exceed original equipment specifications. Any clear tubing used shall be replaced with clear tubing only. No part built in as a function of the vending machine may be removed or bypassed.
(2) SERVICE Connections.
(a)
Utility
openings. All service connections through an exterior wall of the
machine, including water, gas, electrical and refrigeration connections, shall
be grommeted or closed to prevent the entry of insects and rodents.
(b)
Miscellaneous openings.
Miscellaneous openings into the cabinet and through the cabinet wall, other
than coin entrance, money or credit card slots, coin returns, and crown
pullers, but including openings for optional service connections or alternate
installations, shall be provided with effective closures by the manufacturer.
The closures shall be provided for these not-in-use openings, and shall be
easily identifiable, properly marked or adequately described in the instruction
manual for their intended use.
(c)
Disconnection safeguards. All service connections to utilities
shall be of a type that will discourage their unauthorized or unintentional
disconnection.
Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
