Wisconsin Administrative Code
Department of Agriculture, Trade and Consumer Protection
ATCP 140 - Marketing
Chapter ATCP 155 - Vegetable grading procedures and grade standards
Subchapter I - Definitions and General Requirements
Section ATCP 155.06 - Weighing and measuring devices

Universal Citation: WI Admin Code ยง ATCP 155.06

Current through August 26, 2024

(1) GOOD WORKING ORDER. Scales and other measuring devices used in weighing, sampling and grading vegetables shall be maintained in good working order.

(2) ANNUAL INSPECTION AND TESTING. Every scale and measuring device used in weighing, sampling or grading farm products shall be inspected and tested for accuracy annually by the manufacturer of the equipment or an independent testing or service company. Inspection and testing shall comply with applicable specifications, tolerances, standards and procedures required by the national institute of standards and technology and the department. Test weights shall be approved by the department. Annual tests and inspections shall be at the expense of the owner or operator of the scale or measuring device.

Disclaimer: These regulations may not be the most recent version. Wisconsin may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.