Washington Administrative Code
Title 468 - Transportation, Department of (See Title 88)
Chapter 468-95 - Manual on uniform traffic control devices for streets and highways
Section 468-95-360 - Crosswalk markings

Universal Citation: WA Admin Code 468-95-360
Current through Register Vol. 24-06, March 15, 2024

Amend paragraph 04 of MUTCD Section 7C.02 to read:

If used, the diagonal or longitudinal lines should form a 24-inch wide marking pattern consisting of two 8-inch wide markings separated by an 8-inch wide gap or a 24-inch wide solid marking pattern. The marking patterns should be spaced 12 to 60 inches apart but with the maximum gap between marking patterns not to exceed 2.5 times the marking pattern width. Longitudinal marking patterns should be located to avoid the wheel paths and should be oriented parallel with the wheel paths.

Statutory Authority: RCW 47.36.030. 11-23-101, § 468-95-360, filed 11/18/11, effective 12/19/11. Statutory Authority: Chapter 34.05 RCW and RCW 47.36.030. 03-06-053, § 468-95-360, filed 2/28/03, effective 3/31/03.

Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.