Washington Administrative Code
Title 463 - Energy Facility Site Evaluation Council
Chapter 463-85 - Greenhouse gases emissions performance standard and sequestration plans and programs for baseload electric generating facilities
Section 463-85-150 - Calculating greenhouse gases emissions and determining compliance for baseload cogeneration facilities
Current through Register Vol. 24-18, September 15, 2024
(1) To use this section for determining compliance with the greenhouse gases emissions performance standard, a facility must have certified to the Federal Energy Regulatory Commission (FERC) under the provisions of 18 C.F.R. 292 Subpart B as a qualifying cogeneration facility.
(2) The owner or operator of a baseload electric cogeneration facility or unit that must demonstrate compliance with the emissions performance standard in WAC 463-85-130(1) shall collect the following data:
(3) Bottoming-cycle cogeneration facilities. The formula to determine compliance of a bottoming-cycle cogeneration facility or unit with the emissions performance standard will be jointly developed by ecology and the facility. To the extent possible, the facility-specific formula must be based on the one for topping-cycle facilities identifying the amount of energy converted to electricity, thermal losses, and energy from the original fuel(s) used to provide useful thermal energy in the industrial process. The formula should be specific to the installed equipment, other thermal energy uses in the facility, and specific operating conditions of the facility.
(4) Topping-cycle cogeneration facilities. To demonstrate compliance with the emissions performance standard, a topping-cycle facility or unit must:
(5) By January 31 of each year, the owner or operator of each baseload electric cogeneration facility or unit subject to the monitoring and compliance demonstration requirements of this rule will:
Statutory Authority: Chapters 80.70 and 80.80 RCW and RCW 80.50.040. 08-14-064, § 463-85-150, filed 6/25/08, effective 7/26/08.