Washington Administrative Code
Title 332 - Natural Resources, Board and Department of (See also Title 222)
Chapter 332-130 - Minimum standards for land boundary surveys and geodetic control surveys and guidelines for the preparation of land descriptions
Section 332-130-060 - Local geodetic control survey standards

Universal Citation: WA Admin Code 332-130-060
Current through Register Vol. 24-18, September 15, 2024

The following standards shall apply to local geodetic control surveys:

The datum for the horizontal control network in Washington shall be the Washington plane coordinate system as officially adjusted and published by the National Geodetic Survey of the United States Department of Commerce as established in accordance with chapter 58.20 RCW. All final documents, as defined in WAC 196-23-020(1), listing Washington plane coordinate system information must comply with RCW 58.20.180 requirements for recording.

Statutory Authority: Chapter 58.24 RCW. 05-13-104, § 332-130-060, filed 6/17/05, effective 7/18/05. Statutory Authority: RCW 58.24.040(1). 91-19-013 (Order 581), § 332-130-060, filed 9/9/91, effective 10/10/91; 89-11-028 (Order 561), § 332-130-060, filed 5/11/89; Order 275, § 332-130-060, filed 5/2/77.

Reviser's note: RCW 34.05.395 requires the use of underlining and deletion marks to indicate amendments to existing rules, and deems ineffectual changes not filed by the agency in this manner. The bracketed material in the above section does not appear to conform to the statutory requirement.

Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.