Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-829 - Helicopters used as lifting machines
Section 296-829-40020 - Make sure the load is handled correctly

Universal Citation: WA Admin Code 296-829-40020

Current through Register Vol. 24-06, March 15, 2024

(1) You must make sure signal systems, whether radio or hand signals, are checked before hoisting the load. When using hand signals, use those shown in Illustration 1.

(2) You must make sure workers on the ground do either of the following before touching the suspended load:

(a) Use a ground device to safely discharge any static charge; or

(b) Put on and wear rubber gloves.

(3) You must make sure there are enough employees for safe loading and unloading operations.

(4) You must make sure constant communications are maintained between the pilot and signal person.

(5) You must make sure the signal person is distinctly recognizable from other ground personnel.

Click here to view image

Click here to view image

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-09-099, § 296-829-40020, filed 4/20/04, effective 9/1/04.

Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.