Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-818 - Abrasive blasting
Section 296-818-30015 - Blast cleaning nozzles
Universal Citation: WA Admin Code 296-818-30015
Current through Register Vol. 24-06, March 15, 2024
You must make sure nozzles are all of the following:
(1) Mounted on a support when not in use;
(2) Equipped with operating valves that are manually held open.
|
Note: |
To help prevent the buildup of static charges, pressurized tanks used to supply abrasive should be: |
|
1. Connected to the manual control of the nozzle; and |
|
|
2. Have the relief valve or opening located so it can safely vent. |
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. 06-12-074, § 296-818-30015, filed 6/6/06, effective 9/1/06.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
