Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-806 - Machine safety
Section 296-806-48018 - Provide kickback protection for self-feed circular ripsaws when ripping wood products
Universal Citation: WA Admin Code 296-806-48018
Current through Register Vol. 24-06, March 15, 2024
You must provide saws with sectional nonkickback fingers that meet all of the following requirements:
(1) They cover the full width of the feed roll.
(2) They are located in front of the saw.
(3) They are arranged so they keep continuous contact with the material being fed.
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-48018, filed 6/29/04, effective 1/1/05.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
