Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-806 - Machine safety
Section 296-806-45012 - Guard cutting heads on profile lathes and swing-head lathes
Universal Citation: WA Admin Code 296-806-45012
Current through Register Vol. 24-06, March 15, 2024
(1) You must cover all cutting heads on profile lathes, swing-head lathes, and heel-turning machines with a metal guard.
(2) You must make sure guards are made of:
(a)
Sheet metal at least one-sixteenth inches thick.
(b) Cast iron at least three-sixteenth inches
thick.
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-45012, filed 6/29/04, effective 1/1/05.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
