Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-806 - Machine safety
Section 296-806-450 - Lathes
Universal Citation: WA Admin Code 296-806-450
Current through Register Vol. 24-06, March 15, 2024
Summary
In addition to the requirements in this section, you need to refer to the following sections of this chapter in order to fully protect your employees from machine hazards:
Requirements for all machines, WAC 296-806-200 and 296-806-300.
This section applies to the hazards associated with metal and woodworking lathes.
Your responsibility:
To protect employees from hazards associated with metal and woodworking lathes.
METAL LATHES
| You must meet the requirements& | in this section: |
| Provide shields or guards on metal lathes for chip or coolant hazards | WAC 296-806-45002 |
| Safeguard work-holding devices (chucks) | WAC 296-806-45004 |
| Follow these requirements for chip control and handling | WAC 296-806-45006 |
| Safeguard power-clamping devices | WAC 296-806-45008 |
| Restrain extended work-pieces on horizontal lathes | WAC 296-806-45010 |
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-450, filed 6/29/04, effective 1/1/05.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
