Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-806 - Machine safety
Section 296-806-43016 - Use die keys and shims made of proper-grade material
Universal Citation: WA Admin Code 296-806-43016
Current through Register Vol. 24-06, March 15, 2024
You must make sure that die keys and shims are made from a grade of material that will not easily crack or splinter.
| Note: | Die keys and shims should not project more than two inches in front and four inches in back of the ram or die. |
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-43016, filed 6/29/04, effective 1/1/05.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
