Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-806 - Machine safety
Section 296-806-40510 - Use a work rest for off-hand grinding
Universal Citation: WA Admin Code 296-806-40510
Current through Register Vol. 24-06, March 15, 2024
EXEMPTION: | You do not need to use a work rest if: |
1. The size, shape, weight or finishing area of the workpiece prevents its use; or | |
2. Contact with the grinding wheel below the horizontal plane of the spindle is necessary. |
(1) You must use a work rest to support the work.
(2) You must make sure the work rest is:
(a) Rigidly constructed.
(b) Adjustable to compensate for wheel
wear.
(c) Adjusted only when the
wheel is stopped.
(d) Securely
clamped after each adjustment.
(e)
Kept within one-eighth inch of the wheel.
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-40510, filed 6/29/04, effective 1/1/05.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.