Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-803 - Lockout/tagout (control of hazardous energy)
- Section 296-803-099 - Definitions
- Section 296-803-100 - Scope
- Section 296-803-200 - Summary
- Section 296-803-20005 - Establish a written energy control program
- Section 296-803-300 - Summary
- Section 296-803-30005 - Make sure new or modified machines and equipment can accept lockout devices
- Section 296-803-400 - Summary
- Section 296-803-40005 - Provide appropriate means to control energy
- Section 296-803-40010 - Make sure lockout and tagout devices meet these requirements
- Section 296-803-40015 - Make sure lockout devices meet these additional requirements
- Section 296-803-40020 - Make sure tagout devices meet these additional requirements
- Section 296-803-500 - Summary
- Section 296-803-50005 - Use energy control procedures
- Section 296-803-50010 - Meet these requirements when applying lockout or tagout devices
- Section 296-803-50015 - Meet these additional requirements when applying lockout devices
- Section 296-803-50020 - Meet these additional requirements when applying tagout devices
- Section 296-803-50025 - Protect employees from the hazards of stored and residual energy
- Section 296-803-50030 - Verify that the machine or equipment is safe before starting work
- Section 296-803-50035 - Meet these requirements when removing lockout or tagout devices and energizing the machine or equipment
- Section 296-803-50040 - Meet these requirements if it is necessary to temporarily energize a machine, equipment, or component for testing or positioning
- Section 296-803-50045 - Protect employees during shift or personnel changes
- Section 296-803-50050 - Protect employees working in a group
- Section 296-803-50055 - Meet these additional requirements if more than one group is used
- Section 296-803-50060 - Coordinate with outside employers servicing or maintaining your machines or equipment
- Section 296-803-600 - Summary
- Section 296-803-60005 - Provide and document employee training on the energy control program
- Section 296-803-60010 - Provide additional training if you use tagout devices
- Section 296-803-60015 - Retrain employees when necessary
- Section 296-803-700 - Summary
- Section 296-803-70005 - Perform and document periodic reviews to verify employees know and follow the energy control procedures
- Section 296-803-70010 - Do periodic reviews of procedures using lockout devices
- Section 296-803-70015 - Do periodic reviews of procedures using tagout devices
- Section 296-803-800 - Definitions
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.