Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-155 - Safety standards for construction work
Part C-1 - FALL PROTECTION REQUIREMENTS FOR CONSTRUCTION
- Section 296-155-24601 - Scope and application
- Section 296-155-24603 - Definitions
- Section 296-155-24605 - General requirements
- Section 296-155-24607 - Fall protection required regardless of height
- Section 296-155-24609 - Fall protection required at four feet or more
- Section 296-155-24611 - Fall protection required at ten feet or more
- Section 296-155-24613 - Fall arrest specifications
- Section 296-155-24615 - Fall restraint specifications
- Section 296-155-24617 - Positioning device system specifications
- Section 296-155-24619 - Other specifications
- Section 296-155-24621 - Training
- Section 296-155-24623 - Appendix A- Determining roof widths - Nonmandatory guidelines for complying with WAC 296-155-24615
- Section 296-155-24624 - Appendix B - Calculating fall clearance distance using a shock-absorbing lanyard and D-ring anchorage connector - Nonmandatory guidelines for complying with WAC 296-155-24613 (1)(d)
Current through Register Vol. 24-06, March 15, 2024
Requirements relating to fall protection for construction have been moved to chapter 296-880 WAC, Unified safety standards for fall protection.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.