Washington Administrative Code
Title 296 - Labor and Industries, Department of
Chapter 296-150V - Conversion vendor units and medical units
Section 296-150V-0350 - What must test procedures and results for design plans include?
Universal Citation: WA Admin Code 296-150V-0350
Current through Register Vol. 24-06, March 15, 2024
(1) Test to a design must be witnessed by a professional engineer or architect licensed in Washington or by a department employee.
(2) Test reports must contain the following items:
(a) A description of the methods or
standards that applied to the test;
(b) Drawings and a description of the item
tested;
(c) A description of the
test set-up;
(d) The procedure used
to verify the correct load;
(e) The
procedure used to measure each condition;
(f) Test data, including applicable graphs
and observations of the characteristics and behavior of the item tested;
and
(g) Analysis, comments, and
conclusion.
Statutory Authority: Chapter 43.22 RCW. 99-18-069, § 296-150V-0350, filed 8/31/99, effective 10/1/99.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.