Washington Administrative Code
Title 246 - Health, Department of
WATER SYSTEMS
Chapter 246-291 - Group B public water systems
Section 246-291-135 - Interties
Universal Citation: WA Admin Code 246-291-135
Current through Register Vol. 24-18, September 15, 2024
(1) A purveyor submitting a new or expanding Group B system design for approval using a nonemergency intertie source shall provide the following to the department or health officer:
(a) A copy of the intertie
agreement under subsection (2) of this section;
(b) Evidence that the supplying water system
currently operates in compliance with chapter 246-290 or 246-291 WAC;
(c) Location of the proposed
intertie;
(d) Information on any
water quality issues and treatment being used;
(e) Demonstration of the source capacity and
hydraulic capacity of the supply and receiving systems at the designed flow
rate through the intertie;
(f) A
copy of the water right or water right change issued by ecology, if required
under RCW
90.03.383;
(g) Identification of alternative sources
that will be used when the intertie agreement expires if the water is not being
provided in perpetuity; and
(h)
Verification that a source meter has been installed to measure water
received.
(2) An intertie agreement between purveyors must identify:
(a) Specific time periods in which water will
be provided;
(b) The volume of
water available for use, including any seasonal or other restrictions;
and
(c) How operations will be
coordinated.
Statutory Authority: RCW 43.20.050 and chapter 70.119A RCW. 12-24-070, § 246-291-135, filed 12/4/12, effective 1/1/14.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
