Washington Administrative Code
Title 246 - Health, Department of
SEWER SYSTEMS
Chapter 246-274 - Greywater reuse for subsurface irrigation
Section 246-274-005 - Other applicable requirements

Universal Citation: WA Admin Code 246-274-005

Current through Register Vol. 24-18, September 15, 2024

(1) Greywater reuse must comply with all applicable local ordinances and codes, and state statutes and regulations including, but not limited to, the Uniform Plumbing Code, as adopted in chapters 51-56 and 51-57 WAC.

(2) For buildings using an on-site sewage system, the use of a greywater irrigation system does not change the design, capacity, or reserve area requirements, or any other requirement applicable to on-site sewage systems under RCW 43.20.050, chapters 70A.115 RCW, or 246-272A, 246-272B, or 246-272C WAC.

(3) The use of a greywater irrigation system does not serve as an alternative to the use of an approved on-site sewage system or connection to an approved public sewer for greywater disposal at any building, including buildings using waterless toilets.

Statutory Authority: RCW 90.46.015. 11-02-011, § 246-274-005, filed 12/28/10, effective 7/31/11.

Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.