Washington Administrative Code
Title 246 - Health, Department of
SEWER SYSTEMS
Chapter 246-272C - On-site Sewage System Tanks
DESIGN AND CONSTRUCTION REQUIREMENTS
Section 246-272C-0250 - Identification
Universal Citation: WA Admin Code 246-272C-0250
Current through Register Vol. 24-18, September 15, 2024
Manufacturers shall permanently identify each sewage tank. The manufacturer shall display the following information on the top of each tank near the inlet end of the tank or inside the riser if the riser is cast in the tank:
(1) Manufacturer name or logo;
(2) The tank's liquid capacity in gallons;
(3) Maximum burial depth;
(4) The date manufactured or constructed; and
(5) The tank model number or serial number, if available.
Statutory Authority: RCW 43.20.050(2) and (3). 09-23-119, § 246-272C-0250, filed 11/18/09, effective 12/19/09.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
