Washington Administrative Code
Title 246 - Health, Department of
SEWER SYSTEMS
Chapter 246-272C - On-site Sewage System Tanks
DESIGN AND CONSTRUCTION REQUIREMENTS
Section 246-272C-0240 - Additional requirements for pump tanks
Universal Citation: WA Admin Code 246-272C-0240
Current through Register Vol. 24-18, September 15, 2024
(1) A sanitary tee or baffle is required when effluent is pumped into the pump tank.
(2) The sanitary tee or baffle for a pump tank must meet the following requirements:
(a) The inlet sanitary tee or baffle must be
installed on the inlet of the pump tank; and
(b) The inlet sanitary tee or baffle must
extend into the tank a minimum of eight inches below the invert elevation of
the inlet pipe.
Statutory Authority: RCW 43.20.050(2) and (3). 09-23-119, § 246-272C-0240, filed 11/18/09, effective 12/19/09.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
