Washington Administrative Code
Title 246 - Health, Department of
SEWER SYSTEMS
Chapter 246-272B - Large on-site sewage system regulations
Part 7 - LOSS OPERATIONS REQUIREMENTS
Subpart A - Routine Operations
Section 246-272B-07300 - Sewage tank management
Universal Citation: WA Admin Code 246-272B-07300
Current through Register Vol. 24-18, September 15, 2024
(1) The owner, management entity, or operator shall create and follow a routine schedule as required in WAC 246-272B-04200(5) for:
(a)
Sewage tank inspection for septage, grease, and scum; and
(b) Sewage tank pumping.
(2) When removing septage, grease, scum, or sewage from a LOSS, the owner shall: Employ only persons approved by the local health jurisdiction to pump and transport septage, grease, scum, or sewage and that:
(a) Transport septage, grease, scum, or
sewage only in vehicles clearly identified with the name of the
business;
(b) Record and report
septage removal to the owner as required by the approved O&M manual and the
LOSS operating permit; and
(c)
Dispose of septage, grease, scum, or sewage, or apply septage biosolids to land
consistent with local health jurisdiction regulations and chapter 173-308 WAC,
Biosolids management.
Statutory Authority: RCW 70.118B.020. 11-12-035, § 246-272B-07300, filed 5/25/11, effective 7/1/11.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
