Washington Administrative Code
Title 246 - Health, Department of
SEWER SYSTEMS
Chapter 246-272B - Large on-site sewage system regulations
Part 7 - LOSS OPERATIONS REQUIREMENTS
Subpart A - Routine Operations
Section 246-272B-07050 - Operations and maintenance requirements
Current through Register Vol. 24-18, September 15, 2024
(1) The owner shall operate and maintain the LOSS according to:
(2) The owner shall maintain financial resources sufficient for O&M of the LOSS including, but not limited to:
(3) The owner shall respond to customer concerns and service complaints in a timely manner.
(4) The owner shall not install or maintain a bypass to divert sewage or partially treated sewage around any feature of the treatment process, unless approved in writing by the department.
(5) The owner shall not allow substances listed in WAC 246-272B-06000 to enter into the LOSS collection system or any other LOSS component.
(6) The owner shall conduct reliable and representative monitoring following operating permit conditions and requirements, and provide results to the department.
(7) As required in the operating permit, samples must be analyzed by an accredited laboratory, according to chapter 173-50 WAC, Accreditation of environmental laboratories.
(8) O&M data must be available to the department and a third-party guarantor, if any.
(9) The owner shall use reasonable security measures to protect the LOSS treatment processes and components, including the soil profile, from possible damage or harm by unauthorized persons, vehicles, animals, vegetation, or other sources.
Statutory Authority: RCW 70.118B.020. 11-12-035, § 246-272B-07050, filed 5/25/11, effective 7/1/11.