Washington Administrative Code
Title 246 - Health, Department of
RADIATION
Chapter 246-229 - Radiation protection - Particle accelerators
Section 246-229-0090 - What are the minimum requirements for particle accelerator use?

Universal Citation: WA Admin Code 246-229-0090

Current through Register Vol. 24-18, September 15, 2024

The minimum requirements for the registrant to use a particle accelerator are to:

(1) Register the accelerator with the department;

(2) Submit plan review/shielding design to the department and receive written approval;

(3) Train operators and users;

(4) Complete a qualified expert's radiation protection survey of the room/area initially and after any changes in shielding, equipment, or occupancy of adjacent areas;

(5) Provide appropriate portable radiation monitoring equipment that is operable and tested daily, and calibrated every six months, or after any service/repair;

(6) Develop operating and emergency procedures and keep a copy of the current procedures at the accelerator control panel; and

(7) If applicable, provide the means and guidance to determine airborne particulate radioactivity present in areas of airborne hazards, and/or particulate radiation contamination (smear surveys) in target and other pertinent areas.

Statutory Authority: RCW 70.98.050 and [70.98.]080. 02-14-050, § 246-229-0090, filed 6/27/02, effective 7/28/02.

Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.