Washington Administrative Code
Title 246 - Health, Department of
RADIATION
Chapter 246-225A - Radiation safety and diagnostic image quality standards for dental facilities
Section 246-225A-110 - Film processing quality assurance
Universal Citation: WA Admin Code 246-225A-110
Current through Register Vol. 24-18, September 15, 2024
Registrants found in violation of WAC 246-225A-090(1)(f) or (2) shall comply with the following quality assurance requirements for a minimum of three months:
(1) Conduct an acceptable quality assurance program that includes weekly tests of film processing to include:
(a) Density of test films; and
(b) Action taken when test film density falls
below 15 percent of initial reference levels.
(2) Keep a written or computer log of all periodic quality assurance testing covered in subsection (1) of this section, including the weekly test films.
Statutory Authority: RCW 70.98.050 and 70.98.080. 11-19-013, § 246-225A-110, filed 9/7/11, effective 10/8/11; 08-14-074, § 246-225A-110, filed 6/26/08, effective 7/27/08.
Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
