Washington Administrative Code
Title 246 - Health, Department of
RADIATION
Chapter 246-221 - Radiation protection standards
Section 246-221-113 - Use of process, engineering or other controls

Universal Citation: WA Admin Code 246-221-113

Current through Register Vol. 24-18, September 15, 2024

(1) The licensee shall use, to the extent practical, process or other engineering controls, such as, containment, decontamination, or ventilation, to control the concentrations of radioactive material in air.

(2) When it is not practical to apply process or other engineering controls to control the concentrations of radioactive material in air to values below those that define an airborne radioactivity area, the licensee shall, consistent with maintaining the total effective dose equivalent ALARA, increase monitoring and limit intakes by one or more of the following means:

(a) Control of access;

(b) Limitation of exposure times;

(c) Use of respiratory protection equipment; or

(d) Other controls.

(3) If the licensee performs an ALARA analysis to determine whether or not respirators should be used, the licensee may consider safety factors other than radiological factors. The licensee should also consider the impact of respirator use on workers' industrial health and safety.

Statutory Authority: RCW 70.98.050. 01-05-110, § 246-221-113, filed 2/21/01, effective 3/24/01; 94-01-073, § 246-221-113, filed 12/9/93, effective 1/9/94.

Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.