Washington Administrative Code
Title 246 - Health, Department of
FACILITY STANDARDS AND LICENSING
Chapter 246-360 - Transient accommodations
Section 246-360-040 - Water supply and temperature control

Universal Citation: WA Admin Code 246-360-040

Current through Register Vol. 24-18, September 15, 2024

The licensee must:

(1) Ensure that the water supply is from an approved source as specified in chapter 246-290 or 246-291 WAC;

(2) Ensure that the plumbing inside the transient accommodation that provides potable water is free of any actual or potential cross connections with any systems that could be a source of nonpotable liquid, solid, or gas that could contaminate the potable water supply by backflow;

(3) Provide hot and cold water under adequate pressure accessible to guests at all times when the lodging unit is rented;

(4) Provide sinks and bathing fixtures used by guests with hot water at 110 degrees plus or minus 10 degrees Fahrenheit accessible at all times when the lodging unit is rented; and

(5) Label nonpotable water supplies at all accessible connections and valves "unsafe for drinking or other domestic use."

Statutory Authority: Chapter 70.62 RCW. 04-24-002, § 246-360-040, filed 11/18/04, effective 4/1/05. Statutory Authority: RCW 70.62.240. 94-23-077, § 246-360-040, filed 11/16/94, effective 12/17/94; 92-02-019 (Order 225B), § 246-360-040, filed 12/23/91, effective 1/23/92. Statutory Authority: RCW 43.20.050. 91-02-051 (Order 124B), recodified as § 246-360-040, filed 12/27/90, effective 1/31/91; 89-11-058 (Order 328), § 248-144-051, filed 5/17/89.

Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.