Washington Administrative Code
Title 196 - Engineers and Land Surveyors, Board of Registration for Professional
Chapter 196-33 - Rules of professional practice for licensees designing on-site wastewater treatment systems
Section 196-33-400 - Seals and stamps

Universal Citation: WA Admin Code 196-33-400

Current through Register Vol. 24-06, March 15, 2024

All individuals licensed in accordance with chapter 18.210 RCW shall procure a seal/stamp that conforms to the design as authorized by the board. It is the responsibility of the licensee to maintain control over the use of his/her stamp/seal. The impression or image of the seal/stamp shall conform to the below-illustrated design and be of a size that assures full legibility of the following required information:

(1) State of Washington;

(2) Licensed on-site wastewater treatment system designer;

(3) License number;

(4) Licensee's name as shown on license.

Click here to view image

Statutory Authority: RCW 18.210.050, 18.210.060. 01-11-102, § 196-33-400, filed 5/21/01, effective 6/21/01.

Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.