Washington Administrative Code
Title 196 - Engineers and Land Surveyors, Board of Registration for Professional
Chapter 196-23 - Stamping and seals
Section 196-23-010 - Seals

Universal Citation: WA Admin Code 196-23-010

Current through Register Vol. 24-24, December 15, 2024

All individuals licensed in accordance with chapter 18.43 RCW must utilize a seal/stamp that conforms to the design as authorized by the board. It is the responsibility of the licensee to maintain control over the use of his/her stamp/seal. The impression or image of the seal/stamp must conform to the below-illustrated design and be of a size that assures full legibility of the following required information:

(1) State of Washington;

(2) Registered professional engineer or registered professional land surveyor;

(3) Certificate number;

(4) Licensee's name as shown on wall certificate.

Statutory Authority: RCW 18.43.035. 08-10-009, § 196-23-010, filed 4/24/08, effective 7/1/08; 06-22-036, § 196-23-010, filed 10/25/06, effective 11/25/06; 99-15-058, § 196-23-010, filed 7/15/99, effective 8/15/99.

Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.