Washington Administrative Code
Title 16 - Agriculture, Department of (See also Titles 24, 60, and 142)
REGULATORY
Chapter 16-675 - Calibration services, special inspection and testing fees
Section 16-675-025 - What definitions apply to this chapter?

Universal Citation: WA Admin Code 16-675-025
Current through Register Vol. 24-06, March 15, 2024

The following definitions apply to this chapter.

"Calibration" means the comparison of a measurement standard or instrument with another standard or instrument to detect, correlate, report, or eliminate, by adjustment, any inaccuracy of the compared standard or instrument.

"Department" means the Washington state department of agriculture (WSDA).

"Director" means the director of the department or the director's designated representative.

"Laboratory" means the metrology laboratory operated by the department.

"Tolerance testing" means a measurement operation performed to determine whether the actual value of a standard, artifact, or instrument is within a permitted tolerance of its nominal value.

Statutory Authority: Chapters 19.94 and 34.05 RCW. 04-23-043, § 16-675-025, filed 11/10/04, effective 12/11/04.

Disclaimer: These regulations may not be the most recent version. Washington may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.