Current through Register Vol. 41, No. 3, September 23, 2024
A. The required statement for initial
applications shall be in the following form:
NONMETALLIC MINERAL PROCESSING GENERAL PERMIT
APPLICATION STATEMENT
(please print or type)
1. Name of company:
2. Name of owner:
3. Name of plant:
4. Mailing address:
5. Plant site manager or contact:
6. Telephone number:
7. Registration number: (new sites leave
blank)
8. Project name:
9. Description of activity (minerals
processed):
10. Primary standard
industrial classification (SIC) code: Secondary SIC codes:
11. County:
12. Location:
13. A spreadsheet and a plant layout or flow
diagram for all emissions units at the nonmetallic mineral processing facility
for which the application is submitted. The following information shall be
included for each piece of equipment:
a. The
total rated crushing capacity for all primary crushers at the
facility.
b. A description of the
equipment, including applicability of any standard of performance under 40 CFR
Part 60 , as follows:
(1) Widths of belt
conveyors.
(2) Dimensions of the
top screen and configuration (e.g., triple deck) of the screening
unit.
(3) Rated capacity (ton/hr)
of each crusher.
(4) Rated capacity
(ton or ton/hr) of all other equipment not exempt from new source review
program requirements.
c.
A unique ID number.
d. The date the
equipment was manufactured.
e. The
dates any required performance testing was conducted and submitted to the
regional director.
f. Total rated
horsepower of all stationary diesel engines.
g. Maximum hours of operation or gallons of
fuel to be consumed, for each stationary diesel engine.
h. A description and accounting of all
emissions of regulated air pollutants from all emissions units or groups of
emissions units. Emissions shall be determined in a manner acceptable to the
department. Fugitive emissions shall be included in the application as provided
in the spreadsheet.
14.
Calculations on which the information in subdivision 14 h of this subsection is
based to the extent not covered in the spreadsheet. Any calculations shall
include sufficient detail to permit assessment of the validity of the
calculations and to enable the department to verify the actual emissions and
potential to emit for the stationary source. This may include, but not be
limited to, the following:
a. Actual and
potential emissions in tons per annual period for each emissions unit or group
of emission units.
b. Information
needed to determine emissions as follows: fuels, fuel use, raw materials,
production rates, loading rates, and operating schedules.
c. Identification and description of air
pollution control equipment and compliance monitoring devices or
activities.
15. Attach
to this application an aerial photo or scale map which clearly shows the
property boundaries and plant site.
Certification:
"I certify under penalty of law that this document and all
attachments were prepared under my direction or supervision in accordance with
a system designed to assure that qualified personnel properly gather and
evaluate the information submitted. Based on my inquiry of the person or
persons who manage the system, or those persons directly responsible for
gathering and evaluating the information, the information submitted is, to the
best of my knowledge and belief, true, accurate, and complete. I am aware that
there are significant penalties for submitting false information, including the
possibility of fine and imprisonment for knowing violations."
Signatures: Date:
Signatures: Date:
Name of persons signing above: (printed or typed)
(printed or typed)
Titles:
For Department use only:
Accepted/Not accepted by: Date:
Required attachments:
1. Local government certification form
(greenfield sites only)
2.
Spreadsheet and a plant layout or flow diagram
3. Aerial photo or scale
map
B. The required
notice of termination shall be in the following form:
NONMETALLIC MINERAL PROCESSING GENERAL PERMIT
NOTICE OF TERMINATION
1. Nonmetallic mineral processing general
permit number:
2. Reason for
termination request (Choose one):
a. The
emissions associated with facility have been eliminated.
b. The facility authorized by the general
permit has been determined to be shutdown in accordance with
9VAC5-20-220.
c. A permit has been issued for the facility
covered by the general permit issued under the provisions of 9VAC5 Chapter 80
(9VAC5-80).
3. On what
date do you wish coverage under this general permit to terminate?
4. Facility owner
Name:
Mailing address:
City: State: Zip code: Phone:
5. Facility location
Name:
Address:
City: State: Zip code:
6. Certification:
"I certify under penalty of law that all emissions
associated with the identified facility have been eliminated, that the facility
authorized by the general permit has been determined to be shutdown in
accordance with
9VAC5-20-220, or that a permit has
been issued covering the facility under the provisions of 9VAC5 Chapter 80
(9VAC5-80). I understand that by submitting this notice of termination, I am no
longer authorized to operate under the general permit. I also understand that
the submittal of this notice of termination does not release an owner from
liability for any violations of this permit under the Air Pollution Control
Law."
Signatures: Date:
Date:
Name of persons signing above: (printed or typed)
(printed or typed)
Titles:
