Virginia Administrative Code
Title 9 - ENVIRONMENT
Agency 5 - STATE AIR POLLUTION CONTROL BOARD
Chapter 45 - CONSUMER AND COMMERCIAL PRODUCTS
Part II - Emission Standards
Article 4 - Emission Standards for Consumer Products Manufactured on or after August 1, 2010
Section 9VAC5-45-460 - Administrative requirements

1. Each manufacturer of a consumer product subject to 9VAC5-45-430 shall clearly display on each consumer product container or package, the day, month, and year on which the product was manufactured or a code indicating such date.

2. A manufacturer who uses the following code to indicate the date of manufacture shall not be subject to the requirements of subdivision B 1 of this section, if the code is represented separately from other codes on the product container so that it is easily recognizable:

YY DDD = year year day day day

where:

YY = two digits representing the year in which the product was manufactured, and

DDD = three digits representing the day of the year on which the product was manufactured, with 001 representing the first day of the year, 002 representing the second day of the year, and so forth (i.e., the Julian date).

3. The date or date code shall be located on the container or inside the cover or cap so that it is readily observable or obtainable (by simply removing the cap or cover) without irreversibly disassembling a part of the container or packaging. For the purposes of this subdivision, information may be displayed on the bottom of a container as long as it is clearly legible without removing any product packaging.

4. This date or date code shall be displayed on each consumer product container or package no later than the effective date of the applicable standard specified in 9VAC5-45-430 A.

5. The requirements of this section shall not apply to products containing no VOCs or containing VOCs at 0.10% by weight or less.

1. If a manufacturer uses a code indicating the date of manufacture for a consumer product subject to 9VAC5-45-430, an explanation of the date portion of the code must be filed with the board upon request by the board.

2. If a manufacturer changes any code indicating the date of manufacture for any consumer product subject to 9VAC5-45-430 and the board has requested an explanation of any previous product dating code for that consumer product, then an explanation of the modified code shall be submitted to the board before any products displaying the modified code are sold, supplied, or offered for sale within the areas designated in 9VAC5-45-400 B.

3. No person shall erase, alter, deface, or otherwise remove or make illegible any date or code indicating the date of manufacture from any regulated product container without the express authorization of the manufacturer.

4. Date code explanations for codes indicating the date of manufacture are public information and may not be claimed as confidential.

1. For FIFRA-registered insecticides manufactured before August 1, 2011, notwithstanding the definition of "product category" in 9VAC5-45-420 C, if anywhere on the principal display panel, a representation is made that the product may be used as or is suitable for use as a consumer product for which a lower VOC limit is specified in 9VAC5-45-430 A, then the lowest VOC limit shall apply. This requirement does not apply to general purpose cleaners, antiperspirant or deodorant products, and insecticide foggers.

2. For consumer products manufactured on or after August 1, 2010, and FIFRA-registered insecticides manufactured on or after August 1, 2011, notwithstanding the definition of "product category" in 9VAC5-45-420 C, if anywhere on the container or packaging, or on any sticker or label affixed thereto, any representation is made that the product may be used as, or is suitable for use as a consumer product for which a lower VOC limit is specified in 9VAC5-45-430 A, then the lowest VOC limit shall apply. This requirement does not apply to general purpose cleaners, antiperspirant or deodorant products, and insecticide foggers.

1. In addition to the requirements specified in subsections A and C of this section and in 9VAC5-45-510, both the manufacturer and responsible party for each aerosol adhesive, adhesive remover, electronic cleaner, electrical cleaner, energized electrical cleaner, and contact adhesive product subject to this article shall ensure that all products clearly display the following information on each product container that is manufactured on or after the effective date for the product category specified in Table 45-4A.

2. The information required in subdivision 1 of this subsection shall be displayed on the product container such that it is readily observable without removing or disassembling a portion of the product container or packaging. For the purposes of this subsection, information may be displayed on the bottom of a container as long as it is clearly legible without removing product packaging.

3. No person shall remove, alter, conceal, or deface the information required in subdivision 1 of this subsection prior to final sale of the product.