Virginia Administrative Code
Title 9 - ENVIRONMENT
Agency 5 - STATE AIR POLLUTION CONTROL BOARD
Chapter 40 - EXISTING STATIONARY SOURCES
Part II - Emission Standards
Article 6 - Emission Standards for Rubber Tire Manufacturing Operations (Rule 4-6)
Section 9VAC5-40-610 - Control technology guidelines
Universal Citation: 9 VA Admin Code 9VAC5-40-610
Current through Register Vol. 41, No. 3, September 23, 2024
A. Undertread cementing, tread end cementing and bead dipping. The control system should consist of one of the following:
1. Carbon adsorption system.
2. Incineration system.
3. Any system of equal or greater control
efficiency when compared to the standard in
9VAC5-40-600 A 1, B 1, or C 1 as
applicable, provided such system is approved by the board.
B. Green tire spraying. The control method should consist of one of the following:
1. Use
of water based sprays;
2. Carbon
adsorption;
3. Incineration;
or
4. Any method of equal or
greater control efficiency when compared to the standard in
9VAC5-40-600 D 1, of this section,
provided such method is approved by the board.
Statutory Authority
§§ 10.1-1307 and 10.1-1308 of the Code of Virginia.
Disclaimer: These regulations may not be the most recent version. Virginia may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
