Virginia Administrative Code
Title 9 - ENVIRONMENT
Agency 5 - STATE AIR POLLUTION CONTROL BOARD
Chapter 20 - GENERAL PROVISIONS
Part I - Administrative
Section 9VAC5-20-121 - Air quality program policies and procedures

1. In order for the Commonwealth to fulfill its obligations under the federal Clean Air Act, some provisions of these regulations are required to be approved by the U.S. Environmental Protection Agency as part of the State Implementation Plan, and when approved, those provisions become federally enforceable.

2. In cases where these regulations specify that procedures or methods shall be approved by, acceptable to or determined by the board or other similar phrasing or specifically provide for decisions to be made by the board or department, it may also be necessary to have such actions (approvals, determinations, exemptions, exclusions, or decisions) approved by the U.S. Environmental Protection Agency as part of the State Implementation Plan in order to make them federally enforceable. In accordance with U.S. Environmental Protection Agency regulations and policy, it has been determined that it is necessary for the procedures listed in subsection B of this section to be approved as part of the State Implementation Plan.

3. Failure to include in this section any procedure mentioned in the regulations shall not invalidate the applicability of the procedure.

4. Copies of materials listed in this section may be examined by the public at the central office of the Department of Environmental Quality, 1111 East Main Street, Suite 1400, Richmond, Virginia, between 8:30 a.m. and 4:30 p.m. of each business day.

1. Procedures for Testing Facilities Subject to Emission Standards for Volatile Organic Compounds, AQP-1, July 1, 1991.

2. Procedures for Determining Compliance with Volatile Organic Compound Emission Standards Covering Surface Coating Operations, AQP-2, July 1, 1991.

3. Procedures for the Measurement of Capture Efficiency for Determining Compliance with Volatile Organic Compound Emission Standards Covering Surface Coating Operations, AQP-3, April 1, 1996.

4. Procedures for Maintaining Records for Surface Coating Operations and Graphic Arts Printing Processes, AQP-4, July 1, 1991.

5. Procedures for Preparing and Submitting Emission Statements for Stationary Sources, AQP-8, January 1, 1993.

6. Procedures for Implementation of Regulations Covering Stage II Vapor Recovery Systems for Gasoline Dispensing Facilities, AQP-9, January 1, 1993.