Virginia Administrative Code
Title 9 - ENVIRONMENT
Agency 25 - STATE WATER CONTROL BOARD
Chapter 151 - VIRGINIA POLLUTANT DISCHARGE ELIMINATION SYSTEM (VPDES) GENERAL PERMIT REGULATION FOR DISCHARGES OF STORMWATER ASSOCIATED WITH INDUSTRIAL ACTIVITY
Part IV - Sector Specific Permit Requirements
Section 9VAC25-151-320 - Sector Y - Rubber, miscellaneous plastic products, and miscellaneous manufacturing industries

Universal Citation: 9 VA Admin Code 25-151-320

Current through Register Vol. 41, No. 3, September 23, 2024

A. Discharges covered under this section. The requirements listed under this section apply to stormwater discharges associated with industrial activity from rubber and miscellaneous plastic products manufacturing facilities, SIC Codes 3011, 3021, 3052, 3053, 3061, and 3069.

B. SWPPP requirements. In addition to the requirements of Part III, the SWPPP shall include, at a minimum, the following items:

1. Site description. Summary of potential pollutant sources. Rubber manufacturing facilities shall review the use of zinc at the facility and the possible pathways through which zinc may be discharged in stormwater runoff.

2. Stormwater controls.
a. Controls for rubber manufacturers. Rubber manufacturing facilities shall describe and implement specific controls to minimize the discharge of zinc in stormwater discharges from the facility. Listed are possible sources of zinc. These shall be reviewed and the accompanying control measures or their equivalents shall be documented in the SWPPP. Also, some general control measure options to consider include: using chemicals that are purchased in pre-weighed, sealed polyethylene bags; storing materials that are in use in sealable containers; ensuring an airspace between the container and the cover to minimize "puffing" losses when the container is opened; and using automatic dispensing and weighing equipment.
(1) Zinc bags. All permittees shall review the handling and storage of zinc bags at their facilities. Following are some control measure options: employee training regarding the handling and storage of zinc bags; indoor storage of zinc bags; cleanup of zinc spills without washing the zinc into the storm drain; and the use of 2,500-pound sacks of zinc rather than 50-pound to 100-pound sacks.

(2) Dumpsters. The permittee shall minimize discharges of zinc from dumpsters. Following are some control measure options: provide a cover for the dumpster; move the dumpster to an indoor location; or provide a lining for the dumpster.

(3) Dust collectors or baghouses. Permittees shall minimize contributions of zinc to stormwater from dust collectors and baghouses. Improperly operating dust collectors and baghouses shall be replaced or repaired as appropriate.

(4) Grinding operations. Permittees shall minimize contamination of stormwater as a result of dust generation from rubber grinding operations. One control measure option is to install a dust collection system.

(5) Zinc stearate coating operations. Permittees shall minimize the potential for stormwater contamination from drips and spills of zinc stearate slurry that may be released to the storm drain. One control measure option is to use alternative compounds to zinc stearate.

b. Controls for plastic products manufacturers. Plastic products manufacturing facilities shall describe and implement specific controls to minimize the discharge of plastic resin pellets in stormwater discharges from the facility. The following control measures or their equivalents shall be documented in the SWPPP: minimizing spills; cleaning up of spills immediately and thoroughly; sweeping thoroughly; pellet capturing; employee education; and disposal precautions.

C. Benchmark monitoring and reporting requirements. Rubber product manufacturing facilities are required to monitor their stormwater discharges for the pollutants of concern listed in Table 320.

Table 320

Sector Y - Benchmark Monitoring Requirements

Pollutants of Concern

Benchmark Concentration

Tires and Inner Tubes; Rubber Footwear; Gaskets, Packing and Sealing Devices; Rubber Hose and Belting; and Fabricated Rubber Products, Not Elsewhere Classified (SIC Codes 3011, 3021, 3052, 3053, 3061, and 3069).

Total Recoverable Zinc

120 µg/L

Statutory Authority: § 62.1-44.15 of the Code of Virginia; § 402 of the Clean Water Act; 40 CFR Parts 122, 123, and 124.

Disclaimer: These regulations may not be the most recent version. Virginia may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.