Virginia Administrative Code
Title 4 - CONSERVATION AND NATURAL RESOURCES
Agency 25 - DEPARTMENT OF ENERGY
Chapter 40 - SAFETY AND HEALTH REGULATIONS FOR MINERAL MINING
Part XV - Safety and Health Regulations-Underground Only
Article 2 - Fire Prevention and Control
Section 4VAC25-40-3030 - Welding or cutting near combustible materials

Universal Citation: 4 VA Admin Code 4VAC25-40-3030
Current through Register Vol. 41, No. 3, September 23, 2024

When welding or cutting near combustible material, the surrounding area shall, if practical, be wet down thoroughly before and after work is done. A fire patrol of the area shall be maintained afterward for so long as necessary to ensure that no danger of fire exists as determined by a responsible supervisor. In addition, when welding or cutting in shafts, winzes or raises, barriers, bulkheads or other protective measures shall be used to prevent injury to anyone working or traveling below.

Statutory Authority

§§ 45.1-161.3, 45.1-161.294 and 45.1-161.305 of the Code of Virginia.

Disclaimer: These regulations may not be the most recent version. Virginia may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.