Virginia Administrative Code
Title 4 - CONSERVATION AND NATURAL RESOURCES
Agency 25 - DEPARTMENT OF ENERGY
Chapter 150 - VIRGINIA GAS AND OIL REGULATION
Part I - Standards of General Applicability
Article 5 - Technical Standards
Section 4VAC25-150-390 - Shut-in wells

Universal Citation: 4 VA Admin Code 4VAC25-150-390

Current through Register Vol. 41, No. 3, September 23, 2024

A. If a well is shut-in or otherwise not produced for a period of 12 consecutive months, the permittee shall measure the shut-in pressure on the production string or strings and report such pressures to the division annually. If the well is producing on the backside or otherwise through the casing, the permittee shall measure the shut-in pressure on the annular space.

B. A report of the pressure measurements on the nonproducing well shall be maintained and reported to the director annually by the permittee for a maximum period of two years.

C. Should the well remain in a nonproducing status for a period of two years, the permittee shall submit a plan for future well production to the director. A nonproducing well shall not remain unplugged for more than a three-year period unless approved by the director.

Statutory Authority

§§ 45.1-161.3 and 45.1-361.27 of the Code of Virginia.

Disclaimer: These regulations may not be the most recent version. Virginia may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.