Virginia Administrative Code
Title 4 - CONSERVATION AND NATURAL RESOURCES
Agency 25 - DEPARTMENT OF ENERGY
Chapter 130 - COAL SURFACE MINING RECLAMATION REGULATIONS
Part 783 - Underground Mining Permit Applications-Minimum Requirements for Information on Environmental Resources
Section 4VAC25-130-783.25 - Cross sections, maps and plans

Universal Citation: 4 VA Admin Code 25-130-783-25

Current through Register Vol. 41, No. 3, September 23, 2024

(a) The application shall include cross sections, maps, and plans showing-

(1) Elevations and locations of test borings and core samplings;

(2) Elevations and locations of monitoring stations used to gather data for water quality and quantity and fish and wildlife in preparation of the application;

(3) Nature, depth, and thickness of the coal seams to be mined, any coal or rider seams above the seam to be mined, each stratum of the overburden, and the stratum immediately below the lowest coal seam to be mined;

(4) All coal crop lines and the strike and dip of the coal to be mined within the proposed permit area;

(5) Location and extent of known workings of active, inactive, or abandoned underground mines, including mine openings to the surface within the proposed permit and adjacent area;

(6) Location and extent of subsurface water, if encountered, within the proposed permit and adjacent area, including, but not limited to horizontal and vertical distribution of aquifers, and portrayal of seasonal differences of head in different aquifers on cross sections and contour maps;

(7) Location of surface water bodies, such as streams, lakes, ponds, springs, constructed or natural drains, and irrigation ditches within the proposed permit and adjacent areas;

(8) Location and extent of existing or previously surface-mined areas within the proposed permit area;

(9) Location and dimensions of existing areas of spoil, waste, coal development waste and noncoal waste disposal, dams, embankments, other impoundments, and water treatment facilities within the proposed permit area;

(10) Location and depth, if available, of gas and oil wells within the proposed permit area and water wells in the permit area and adjacent areas;

(b) Maps, plans, and cross sections included in a permit application which are required by this section shall be prepared by or under the direction of and certified by a qualified registered professional engineer or certified professional geologist, with assistance from experts in related fields, such as land surveying and landscape architecture and shall be updated as required by the division.

Statutory Authority

§§ 45.1-161.3 and 45.1-230 of the Code of Virginia.

Disclaimer: These regulations may not be the most recent version. Virginia may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.