Utah Administrative Code
Topic - Transportation
Title R930 - Preconstruction
Rule R930-5 - Establishment and Regulation of At-Grade Railroad Crossings
Section R930-5-2 - Incorporation by Reference

Universal Citation: UT Admin Code R 930-5-2

Current through Bulletin 2024-06, March 15, 2024

The following federal law, state law, federal agency manuals, association standards and UDOT technical requirements are incorporated by reference:

(1)23 CFR 148 "Highway Safety Improvement Program" (2005);

(2)23 CFR 646 "Railroads" (2009);

(3)23 CFR 655 "Traffic Operations" (2009) "Manual of Uniform Traffic Control Devices (MUTCD)" (2003, with revisions 1 and 2 incorporated, dated 2007);

(4)23 CFR 924 "Highway Safety Improvement Program" (2009);

(5)49 CFR 209 "Accidents and Incidents" (2009);

(6)49 CFR 212 "State Safety Participation Regulations" (2009);

(7)49 CFR 222 "Use of Locomotive Horns at Public Highway-Rail Grade Crossing" (2009)

(8)49 CFR 659 "Rail Fixed Guideway Systems; State Safety Oversight" (2009);

(9) "A Policy on Geometric Design of Highway and Streets", American Association of State Highway and Transportation Officials (AASHTO) (2004);

(10) "Railroad-Highway Grade Crossing Handbook", Federal Highway Adminstration (FHWA) (August 2007);

(11) "Preemption of traffic signals near Railroad Crossings", Institute of Traffic Engineers (ITE) (2004);

(12) "Manual for Railway Engineering", Chapter 28, Clearances, American Railway Engineering and Maintenance-of-Way Association (AREMA), 2007; and

(13) "Standard Drawing ST-7 Pavement Marking and Signs at Railroad Crossings", Utah Department of Transportation (UDOT) (2008).

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.