Utah Administrative Code
Topic - Transportation
Title R909 - Motor Carrier
Rule R909-2 - Utah Size and Weight Rule
Section R909-2-35 - Special Truck Equipment
Universal Citation: UT Admin Code R 909-2-35
Current through Bulletin 2024-06, March 15, 2024
(1) The following vehicle configurations are considered special truck equipment:
(a) concrete pumper trucks;
(b) cranes or trucks performing crane service
with a crane lift capacity of five tons or more; and
(c) well boring trucks.
(2) Vehicles classified as special truck equipment may be issued an oversize or overweight permit if exceeding legal dimensions.
(a) An approved profile sheet for
special truck equipment must be carried in the vehicle with the permit, if the
axle limitations specified in Section
R909-2-5 Table 2 or actual
bridge or gross are exceeded.
(b)
Must meet the requirements of a non-divisible load as defined in Subsection
R909-2-3(33).
(3) Vehicles classified as special truck equipment are eligible for a 50 % registration fee reduction.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.