Utah Administrative Code
Topic - Transportation
Title R909 - Motor Carrier
Rule R909-2 - Utah Size and Weight Rule
Section R909-2-26 - Overweight Non-Divisible Loads Exceeding 125,000 Pounds Gross or Axle Weights

Universal Citation: UT Admin Code R 909-2-26

Current through Bulletin 2024-06, March 15, 2024

(1) Loads exceeding 125,000 pounds gross, or axle weights in Section R909-2-24 may only purchase single trip permits.

(2) Axle, bridge, and gross weight allowances will be determined based on the non-divisible bridge table formula ~1.47 x 500 (LN/N-1 + 12N + 36) or in accordance with the bridge table.

(3) 9 feet wide axles are allowed 7.5% more weight than 8 feet wide axles.

(4) 10 feet wide axles are allowed 15% more weight than 8 feet wide axles.

(5) If using an axle equipped with eight tires, rather than four, add 10% to the weight authorized for an 8-foot-wide axle group.

(6) Tires must comply with the manufacturer's tire load rating as indicated on the tire side wall.

(7) STE operations must have an STE profile sheet if the axle limitations specified in Table 3 or bridge table are exceeded.

Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.