Utah Administrative Code
Topic - Public Safety
Title R714 - Highway Patrol
Rule R714-162 - Equipment Standards for Heavy Motor Vehicle, Trailer and Bus Safety Inspections
Section R714-162-7 - Registration
Universal Citation: UT Admin Code R 714-162-7
Current through Bulletin 2024-06, March 15, 2024
(1) When reviewing the vehicle registration papers, the inspector shall:
(a) check the
vehicle registration certificate, vehicle identification number, license
plates, and vehicle description for agreement;
(b) enter the manufacturer's vehicle
identification number and license plate number into the online program or
record on the safety inspection certificate if not using the online
program;
(c) advise the owner when
paperwork disagreements are accidental or clerical in nature; and
(d) issue a rejection inspection certificate
when:
(i) the registration certificate,
vehicle identification number, license plate, and vehicle description are not
in agreement; or
(ii) the vehicle
identification number is missing or obscured.
(e) Verify the vehicle identification number
on the registration or other documents with the number on the
vehicle.
(2) The inspector shall examine the vehicle's license plates and comply with the following requirements:
(a) if the vehicle is
registered, verify the license plates are securely mounted and clearly
visible;
(b) check to ensure the
Utah Apportioned plate is properly mounted; and
(c) advise the owner when a license plate is
not securely fastened, is obscured, or cannot be clearly identified.
Disclaimer: These regulations may not be the most recent version. Utah may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
